jeff_p58 profile

Posts: 13
Offline

About Me

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • May 16, 2017 at 7:33 pm #0
    Posts: 13
    Offline
    08/29/2016 at 8:44 am

    tonguester,

    I would agree with you if there was some way to assure that the affirmation was optimally worded to get the most impact. However, the optimum wording to convey a concept is extremely difficult to measure and harder still to draft properly.

    And over time, as the target subconscious mind shifts in it’s perceptions the message with the optimum impact could and probably will change.

    So in my opinion. 10 repetitions of the optimum worded affirmations would beat 10 affirmations worded slightly differently….
    but
    10 affirmations worded slightly differently will have more impact than a sub-optimum affirmation repeated 10 times.

    Since we can not craft optimum affirmations, i think the focus on one set of words repeated more times is not always the best course of action.

    Posts: 13
    Offline
    07/30/2016 at 7:37 am

    Spontaneous – and historically she has had negative reactions to the concept of ‘ownership’ – and she has subsequently made more comments along these lines – about how ownership is not really a bad thing

    Posts: 13
    Offline
    06/24/2016 at 12:12 pm

    Well based on my experiences the last couple of days… the Subliminall.ny plugin in the link seems to do exactly as the nyquist prompt code referenced everywhere on this forum. Is easier to use since yo only have to put in the carrier frequency and it seems to process files faster.

    (http://forum.audacityteam.org/…..9d0aedcb53)

    Posts: 13
    Offline
    06/23/2016 at 3:18 pm

    I ended up getting another Cannon as well as a Picture Frame for her home office since she works from home a lot. While I was waiting for the devices – I spent some time researching NyQuist scripting (http://forum.audacityteam.org/viewtopic.php?f=42&t=58548&sid=7cd08c5b8d5acedc45b32e9d0aedcb53)

    So i started off loading some files using that plugin. I got a LOT of squeaky background on the Cannon. So i went back to the original Nyquist Prompt and not the plug in.

    Still get squeaks – way too many squeaks – even if i tone down the volume and up the carrier frequency.

    Since the Pug ins do not really limit the upper end of the spectrum like the prompt does (was showing 24kHz as upper end in spectrum analysis) – could i have blown out the Cannon when i first tried it out?

    Posts: 13
    Offline
    05/30/2016 at 5:50 pm
    My husband is my master
    I belong to Jeff
    I will please Jeff
    Jeff is my master
    I will please Jeff
    Master Jeff cherishes his property
    Jeff Loves and cherishes me
    Jeff loves me just as I am
    Posts: 13
    Offline
    05/30/2016 at 5:47 pm

    Editor here uses less than and greater than as text markups – will not display stuff inside those characters – since the Pause command uses braces instead it seems to show those

    I have found that in TextAloud you can tell it to pause after every line – makes editing the scripts easier and makes them more readable not to have all those {{Pause=0.5}} in there (Pauses are in seconds and silences are in milliseconds)

    Tools>Text Processing>Pauses and Text Insertions
    Add a new rule that pauses between paragraphs (on a new line character)

    I pause for a second between lines
    at the end of a block of lines, I then add a {{Pause=2}} to get the pause up to 3 seconds between blocks

    Posts: 13
    Offline
    05/30/2016 at 5:41 pm

    it stripped out my commands – strange – Wonder if it will strip out {Pause} commands since those are the alternative commands

    Posts: 13
    Offline
    05/30/2016 at 5:38 pm

    I have found that in TextAloud you can tell it to pause after every line – makes editing the scripts easier and makes them more readable not to have all those in there

    Tools>Text Processing>Pauses and Text Insertions
    Add a new rule that pauses between paragraphs (on a new line character)

    I pause for a second between lines
    at the end of a block of lines, I then add a to get the pause up to 3 seconds between blocks

    Posts: 13
    Offline
    05/30/2016 at 8:06 am

    thanks for the explanation. am going to have to let this rattle around in my brain for a bit to see what takes. LOL

    Posts: 13
    Offline
    05/29/2016 at 6:35 am

    Thanks for the quick reply Fizbin,

    1. I sort of understand that is what that last set of filters is supposed to do. But I do not follow how filtering everything not int the 15-24 kHz range does that.

    2. OK, we should decode, play and make sure that the file says what we think it should say – how exactly do we decode it?

    3. I think my earlier issues with Nyquist (when I was not checking to use legacy syntax) was blocking my understanding of volume levels – now that the frequency shift is working (I Think – LOL) it seems to be OK

Viewing 10 posts - 1 through 10 (of 10 total)